Terumo 801763, Operator'S Manual, Page: 243 / 359

Modules
7-22
Temperature Monitoring
Setting Alarm Limits
The default alarm limit is set when a Perfusion Screen is configured.
To change the default value for the current case only:
1. Select the
Temps
subtab within the Safety tab at the bottom of the CCM or touch
the Temperature icon on the CCM.
2. Ensure the correct device name is displayed on the Safety Screen.
3. To change the alarm value, touch the Alarm button. The background of the
button will turn white.
4. Use the arrows to adjust the limit.
5. Touch the
Alarm
button again to store the new limit.
System Response to Alarm Condition
Temp Temp Audible
Icon Module Message Tone
Flashes red LED flashes red Message with sensor name Dual-tone alarm
in the CCM message area.
Safety tab opens.
Flow
Safety
ART Temp
Previous
Temps
38.0 C
42.5
Alarm:
Limits ( C)
16:07:51
Device Name
+ 1
+ 0.1
– 0.1
– 1