Terumo 801763, Operator'S Manual, Page: 349 / 359

Additional Information
12-38
Subtab
A view contained within a tab.
Summary
A description of the components, connections, and responses for a Perfusion Screen
that can be viewed in the Perfusion Screen selection area.
System Base
The system base is a moveable platform designed for the adaptable mounting of
system components on poles and on a central rail. The base houses the network
infrastructure that provides power and communications to all system modules.
System Configuration Card
A PC card located in one of the CCM card slots that stores CCM settings and
Perfusion Screens. This card can be used to transfer Perfusion Screens from one
CCM to another and to upgrade CCM and module software.
System Network
A design that distributes power and communications to all system components.
This design allows all the different types of system modules to be connected to
any module receptacle on the base. It also allows multiple types of modules to be
connected to the system.
System Power
The power system located within the base transforms AC (Mains) power into the DC
levels required by the system modules. Integrated batteries provide uninterruptible
backup power in the event of AC (Mains) power loss during use.
System Tab
The area of the Perfusion Screen used to reassign modules and to view system
settings, power, and module information.
Tab
Tabs are located on the bottom part of a Perfusion Screen. They allow access to the
following sections of the Perfusion Screen: Setup, Safety, CPG, Aux, System, and
Post Case. An additional tab, the Pump tab, is accessed by touching the Pump icon.
Temperature Module
The interface between a temperature probe and the rest of the system.
Temperature Probe
The temperature probe converts temperature into electrical signals detected by the
temperature module.
TLink™ Data Management System
A software program that can accept data from the System 1 using a data transfer
module.