Terumo 801763, Operator'S Manual, Page: 88 / 359

Central Control Monitor
4-26
Deliver Mode
To start tracking cardioplegia delivery:
1. Select Deliver mode by pressing the Deliver button.
2. Start the cardioplegia pump. The cardioplegia pump must be in L/min mode for
total flow rate to be displayed on the CCM and pump local display.
• The system tracks and displays the volume for Current Delivery and Total Delivery.
• The Total Delivery value is grayed out indicating that it cannot be modified.
To stop cardioplegia delivery:
1. Touch the cardioplegia pump Stop button.
• Volume tracking stops.
• Time Since Last Delivery is set to 0 and the timer starts counting the time since
last delivery.
• If the subtab is closed while the timer is active, the time since last delivery is
displayed on the CPG tab on the CCM.
• The Total Delivery value is displayed in black indicating that it can be modified.
To modify the Total Delivery volume:
1. Touch the Total Delivery button. The button background turns white.
2. Use the arrows to adjust the total volume. The small arrows change the volume
by 10 mL, the large arrows change the volume by 100 mL.
3. Touch the Total Delivery button again to store the new Total Delivery value.
• The adjustment arrows disappear and the Total Delivery button background turns
gray.
Setup Safety
CPG
Aux System
Post Case
001:18
CPG
Auto Dose
Setup
Delivery
Time Since Last Delivery:
000:00
mL
Current Delivery:
0
0 mL
Deliver:
Recirculate:
Total Delivery:
16:07:51
CPG
Auto Dose
Setup
Delivery
Time Since Last Delivery: 001:18
mL
Current Delivery:
1000
1000 mL
Deliver:
Recirculate:
Total Delivery:
16:07:51
CPG
Auto Dose
Setup
Delivery
Time Since Last Delivery:
001:18
mL Current Delivery:
1000
1000 mL
Deliver:
Recirculate:
Total Delivery:
16:07:51