Terumo 801763, Operator'S Manual, Page: 346 / 359

Additional Information
12-35
Occluder Module
The occluder module serves as the interface between the occluder head and the
system. The occluder system is controlled from the CCM and can be configured to
respond to primary pump events.
Offline Device
A device that has not been configured as part of the current Perfusion Screen.
Online Device
A device that has been configured as part of the current Perfusion Screen.
Password
A code that protects access to the Configuration and Service areas of the CCM.
Passwords can be set up for individual Perfusion Screens.
Pause Response
The temporary reduction of the roller pump speed to zero in response to an event.
The pump speed will automatically ramp back up to its previous setting when the
condition is cleared. A roller pump will pause when the safety cover is opened.
A pause response can also act as an event and initiate a response in another
connected device.
PC Card
A PCMCIA data storage and transfer card.
Perfusion
Perfusion is a functional area of the Central Control Monitor that is used to select a
Perfusion Screen and run a case. In preparation to run a case, patient information
can be entered, calibrations can be performed, and safety system limits can be
checked, modified for that case only if needed, and activated. During use, the CCM
can be used to control and monitor all system modules and devices.
Perfusion Screen
A representation of the perfusion circuit on the CCM touch screen that is used to
control and monitor perfusion parameters during a case. Perfusion Screens can be
created or modified in the Configuration area.
Post Case Tab
The section of the Perfusion Screen used to exit a case and return to the Main
Screen.
Pressure Alert/Alarm Limit
User settable limits for negative and positive pressure values. When these limits are
exceeded, an event is reported to the system. Pumps can be set up to respond to
pressure events.
Pressure Module
The pressure module serves as the interface between up to two pressure transducers
and the system. This module monitors signals from the pressure transducers and
communicates pressure values, alerts, and alarms to the system.
Pressure Servo
The regulation of pump speed using pressure data as the feedback source to
maintain a constant pressure.