Terumo 801763, Operator'S Manual, Page: 164 / 359

Central Control Monitor
4-98
Edit a Perfusion Screen
To change an existing Perfusion Screen, select the Perfusion Screen from the list and
touch the
Edit button.
Add, Edit, Place, and Remove
Use the
Add, Edit, Place,
and
Remove
buttons to make changes to the pumps and
devices. Select the component by touching its name on the list. Primary pumps may
only be edited; they may not be removed and their position in the graphic display
cannot be changed. Devices may be added up to a maximum of 24 components,
including 6 pumps in each Perfusion Screen.
Edit
is used to change the cardioplegia or backup designation of a pump, the name
of the pump, and the color of the pump. If the pump type must be changed, remove
the existing pump, and add a new pump of the correct type to the configuration. Edit
is also used to change the name of the device, the color of the device, and properties
of the devices such as pressure and temperature limits.
Place
is used to change the location of the pump or device on the graphic display.
Locations for the primary pump, the CDI devices, and Pump and Clamp timers are
fixed and cannot be changed.
Remove
is used to remove a pump or device from the graphic display. The primary
pump cannot be removed.
New
Edit
View Summary >
Rename >
Set Password >
Delete
Return to Main
Name Ready: Last Edit: Password:
Perfusion Screens
15/10/2002
15/10/2002
CABG Roller
CABG Centrif
Yes
Yes
Min AVR Yes
Circ-ARREST Yes
Pediat-
ric
No
Password
15/10/2002
15/10/2002
15/10/2002
Edit Button