Terumo 801763, Operator'S Manual, Page: 26 / 359

System Overview
2-5
The system software version can be viewed on the lower right side of the Main
Screen. Four buttons,
Perfusion
,
Configuration
,
Service
, and
Shut down
allow
access to the functional areas or provide a controlled shut down of the system
computer before turning the AC (Mains) power off to the entire system.
Perfusion
A Perfusion Screen is a graphical representation of the perfusion circuit on the CCM
touch screen that is used to control and monitor perfusion parameters during a case.
The Perfusion area allows the user to select a Perfusion Screen for running a case.
The initial screen lists all the Perfusion Screen names and their password protection
status.
A Configuration Summary can be viewed for each Perfusion Screen or the desired
screen can be selected and opened.
Perfusion Screens are created or modified in the configuration area. If desired,
access to a Perfusion Screen can be limited by assigning a password.
Perfusion Screen
Open
View Summary >
Return to Main
Name Password:
Choose a Perfusion Screen
CABG Roller
CABG Centrif
Yes
Yes
Min AVR No
Circ-ARREST Yes
Pediatric No
CABG ROLLER
Perfusion Screen Summary
Graphic Orientation:
Primary Pump Left - Patient Head Left
Blood Reservoir Type:
Open
Air Detectors:
ART Air
Level Detectors:
Level
Occluders:
Occluder
Pressure Sensors:
ART Pres
CPG Pres
Temperature Sensors:
ART Temp
VEN Temp
Bladder
CPG1 Temp
CDI 500:
CDI 500
Large Roller Pumps:
Arterial
Safety Connections:
Device Event Response
Level Low Level Alarm Stop
Level Low Level Alert Message 0nly
ART Air Air Detected Alarm Stop
ART Pres High Presure Alarm Stop
ART Pres High Presure Alert Message 0nly
CPG
Safety Connections:
Device Event Response
Arterial Pump Stopped Stop
Arterial Pump Paused Stop
CPG Press High Pressure Alarm Stop
CPG Press High Pressure Alert Message Only
Small Roller Pumps:
Vent
Sucker 1
Sucker 2
Timers:
Pump
Clamp
TMR1
Close