Terumo 801763, Operator'S Manual, Page: 120 / 359

Central Control Monitor
4-56
Configure Pumps
Add Primary Pump
After selecting patient and pump orientation, the next step in creating a Perfusion
Screen is to add the primary pump.
The primary pump is the arterial pump.
Pump type, display units, reservoir type, pump name, and pump color are selected
from this screen.
All the selections must be made, or the defaults accepted, before continuing.
Select Pump Type
Select the pump type by touching the appropriate name. The default selection is
Large Roller Pump.
Display Units
If roller pump is selected as the pump type, a unit of measure related to flow rate can
be chosen.
1. Touch the
Default Display Units
button until the desired unit of measure is
displayed.
• These units will be displayed on both the CCM and the roller pump display. The
default selection is L/min.
If a centrifugal pump is selected as the pump type, the display units default to RPM.
A centrifugal pump can be configured to display flow rates in L/min if a flowmeter is
added to the configuration and placed on the centrifugal pump icon. (See
Add Flow
Sensor section for further details.)
Select Pump Color
Available: Assigned:
No
Selection
Select Pump Name:
Arterial
Select From List:
ART
CPG
CPG1
CPG2
Vent
Vent1
Arterial
Enter New Name >
Or Enter New Name:
Next > < Previous
Open
Closed
Select Blood Reservoir Type:
Default Display Units
L/min
Large Roller Pump
Small Roller Pump
Select Pump Type:
Centrifugal Pump
To Add Primary Pump:
Configure Perfusion Screen > Add Primary Pump
CABG Roller
Cancel
Select Reservoir Type
Display Units
choices for roller pump are:
Select Pump Type choices
{
Primary Pump Only
L/min
RPM
L/min/m2
mL/kg/min
Select Pump Color
Select Pump Name