Terumo 801763, Operator'S Manual, Page: 130 / 359

Central Control Monitor
4-65
Configure Other Devices
Configure and add other devices to the Perfusion Screen through the Configure
Other Devices menu selection.
Maximum allowed
Air Detector 4
Level Detector 1
Occluder 1
Pressure Sensor
8
Flow Sensor 4
Temperature Sensor 8
CDI™ 100/101 or CDI™ 500 1
Timers 4
Note:
Two of the 4 timers are designated as Pump and Clamp timers.
Gas % O2 FiCO2
0
0 0
Clamp
Reset Reset
000:00
Pump
Reset
Reset
000:00
Arterial
L/min
START
CABG
Close
Devices:
Assign Devices to Modules
Configure Pumps
Configure Other Devices
Edit Safety Connections
Save As >
Add >
Configure Perfusion Screen > Configure Other Devices
Menu
CABG ROLLER
Vent
L/min
START
Sucker1
L/min
START
Sucker2
L/min
START
CPG
L/min
START
Edit >
Place >
Remove > Place > Remove >
Edit >
When placing devices, consider the appropriate location for the device currently
being placed, and also appropriate locations for devices yet to be placed as devices
cannot share locations. The Do Not Place button can be used to move devices on the
graphic display. All devices except timers and the backup pump will be removed from
the Perfusion Screen if they are not placed before the screen is closed.
If using a CDI monitor, it is recommended to add the CDI device before adding
other devices. The CDI icons have fixed locations on the screen. Placement of the
pressure, flow, and temperature icons in certain areas can interfere with the CDI icon
placement.