2-2
SRW-5000/5500
Error messages are described on Section 2-2 in the order of list.
Error Messages
Code
Message
Page Description
01
REEL SLACK THREAD
2-3
Tape slacking is detected in the threading or unthreading operation.
ERROR
02
REEL SLACK SHTL ERROR
2-4
Tape slacking or tape breaking is detected in the SEARCH, FF, or REW mode.
03
REEL SLACK VAR ERROR
2-5
Tape slacking, tape breaking, or supply or take-up reel locking is detected in the REC or
PLAY mode.
04
REEL SPEED ERROR
2-6
A malfunctional tape transport speed is detected in the FF or REW mode.
05
REEL FG ERROR
2-6
The malfunctional operation of the supply or take-up reel is detected during cassette
insertion.
06
OVER TENSION
2-7
Excessive tape tension is detected in the REC or PLAY mode.
07
CAPSTAN ERROR
2-7
Malfunction of capstan motor is detected.
08
DRUM ERROR
2-8
Malfunction of drum motor is detected.
09
THREAD TIME OVER
2-8
Malfunction of threading or unthreading operation is detected.
0A
FULL TOP ERROR
2-9
It is detected that the tape top processing is not completed in the threading mode.
10
HUMID DETECT
2-9
Dew condensation is detected.
11
TOP END BOTH DETECT
2-10
The tape top and tape end are detected simultaneously.
12
TAPE TOP ERROR
2-10
Malfunction of tape top sensor is detected.
13
TAPE END ERROR
2-11
Malfunction of tape end sensor is detected.
14
FAN MOTOR ERROR
2-11
Malfunction of cooling fan motor is detected.
20
CC TIME OVER
2-12
Malfunction of cassette compartment-up or down operation is detected.
21
SHIFT TIME OVER
2-12
Malfunction of movement of the reel table corresponding to the cassette size is detected.
22
POSITION BOTH DETECT
2-13
The L-cassette and S-cassette positions of the reel table are detected simultaneously.
23
THREAD BOTH DETECT
2-13
The thread end and unthread end states of the threading ring are detected simultaneously.
24
DT HEAD ERROR
2-13
Malfunction of DT head is detected.
93
DR IF ERROR
2-14
Abnormality in the interface between SV CPU (on SS-95 board) and DR MPU (on DR-508
board) is detected.
97
NVRAM CHECK SUM ERROR 2-14
The abnormal operation of an NV-RAM (on DR-508 board) for the servo system is
detected.
A0
SY UNDEFINE ERROR
2-14
System control errors other than the follows are detected.
A2
SY1-SY2 DPRAM ERROR
2-14
The abnormal operation of an DPRAM (on SS-95 board) between SYS1 and SYS2 is
detected.
A5
SY-FC DPRAM ERROR
2-14
The abnormal operation of an DPRAM (on FC-91 board) between SYS1 and FC is
detected. (HKSR-5001 installed model only)
A8
SY NVRAM CHECK SUM
2-15
The abnormal operation of an NV-RAM (on SS-95 board) for system control is detected.
ERROR
B8
SY1-SY2 INTERFACE ERROR 2-15
The communication error of SYS CPU is detected.
B9
SY-SV INTERFACE ERROR
2-15
The communication error of SV CPU (on SS-95 board) is detected.
BA
SY-EQ INTERFACE ERROR
2-15
The communication error of EQ CPU (on EQ-94 board) is detected.
BB
SY-FC INTERFACE ERROR
2-16
The communication error of FC CPU (on FC-91 board) is detected.
(HKSR-5001 installed model only)
BC
SY-50PIN INTERFACE
2-16
The communication error of CPU (on CP-378 board) for the 50-pin parallel remote
ERROR
interface is detected.
FF
SV UNDEFINE ERROR
2-16
Servo system errors other than the above are detected.