6-3
SRW-5000/5500
A
B
C
D
E
F
G
H
J
K
L
M
N
S802
RV1001 (Tracking VR)
P
1
2
<SS-95 board, side A>
6-1-5. Cassette Tape
The tape path adjustment is performed after the cassette compartment removal.
Then, it is necessary to make a modification to the cassette tape and alignment tape
that are used for tape path adjustment as follows.
When setting the cassette tape or the alignment tape, align it to the cassette supports
on the mechanical deck. And then, put a weight on the cassette so that it does not
rise up. The weight about 1 kg is suitable.
n
Never attempt to disassemble the cassette tape.
6-1-6. Tracking Control
The Bit-1 of the DIP switch S802 on the SS-95 board enables the RV1001 variable
resistor on the SS-95 board to control manually the tracking in the playback mode.
Bit-1 of S101/SS-95: ON (upper side): Enables tracking control manually
(RV1001/SS-95).
OFF (lower side): Fixes tracking control.
After the adjustment, set the Bit-1 of the S802 to OFF to fix the tracking control.
1
2
Cassette lid
Lock knob
3
Open the cassette lid
2
while pushing the lock knob
1
and fix the cassette lid using an adhesive tape
3
.