5-77
SRW-5000/5500
Harness
T drawer
assembly
Roller
Positioning boss (A)
Positioning
boss (B)
Positioning
hole (B)
Positioning boss (A)
Threading ring assembly
Positioning hole (A)
Tape top sensor
PWH3
x
8
PWH3
x
8
Hook
Harness
Attach the T Drawer Assembly
Installation
3. Attaching the T Drawer Assembly
(1) Clean the mounting surfaces between the T
drawer assembly and the MD base assembly.
(2) Insert the positioning boss (B) of the T
drawer assembly into the positioning hole (B)
at a shallow depth. Fit the positioning boss
(A) to the positioning hole (A) by pushing
and turning from outside of the thread ring
assembly.
(3) Fix the T drawer assembly with the two
screws.
Tightening torque: 78.4
x
10
_
2
N
.
m
{8.0 kgf
.
cm}
(4) Connect the harness to the connector of the
tape top sensor.
(5) Hang the harness on the hook of the T drawer
assembly to fasten it.
n
Be careful not to apply excessive force to the
adjusting arm.