3-21
SRW-5000/5500
[F7]
(THREAD MOTOR) key
This menu checks the functions of the threading motor, threading end sensor, and
unthreading end sensor.
Checking
1.
Press the
[F7]
(THREAD MOTOR) key of the SERVO CHECK menu to
display the THREADING MOTOR menu.
2.
Press the
[SET]
key.
3.
Turn the search dial (in JOG mode) slowly continuously in FORWARD (
2
)
direction.
.
Check to see that the threading ring rotates counterclockwise (
3
) and that the
message on the color display changes from “UNTHREAD END” to “.....”.
.
Check to see that the threading ring stops in the threading end state and that
the message changes from “.....” to “THREAD END”.
n
When the search dial pauses halfway, the threading ring also stops.
4.
Turn the search dial (in JOG mode) slowly continuously in REVERSE (
3
)
direction.
.
Check to see that the threading ring rotates clockwise (
2
) and that the mes-
sage changes from “THREAD END” to “.....”.
.
Check to see that the threading ring stops in the unthreading end state and that
the message changes from “.....” to “UNTHREAD END”.
n
When the search dial pauses halfway, the threading ring also stops.
5.
To finish the check, press the
[F10]
(EXIT) key once in the unthreading end
state.
n
Unless the unthreading end state, the threading ring will automatically return to
the unthreading end position on pressing the
[F10]
(EXIT) key.
6.
Press the
[F10]
(EXIT) key while pressing the
[SFT]
(SHIFT) key.
7.
Press the
[F10]
(EXIT) key after the message “Check Complete” is displayed to
return to the SERVO CHECK menu.
F1
F2
F3
F4
DIAG
ALT
F5
F6
F7
F8
F9
F10
CASSTT
SW
CASSTT
CMP SW
S REEL
MOTOR
CCM
MOTOR
EXIT
SERVO CHECK MENU
TE
SNSR
DEW
SNSR
T REEL
MOTOR
CAPSTN
MOTOR
THREAD
MOTOR
THREADING MOTOR
Press SET key.
SERVO CHECK MENU
Turn JOG DIAL
in JOG mode
UNTHREAD END
SERVO CHECK MENU
Turn JOG DIAL
in JOG mode
. . . . . .
[SET]
DIAL
(
3
)
DIAL
(
2
)
SERVO CHECK MENU
Turn JOG DIAL
in JOG mode
THREAD END
DIAL
(
3
)
DIAL
(
2
)