5-11
SRW-5000/5500
Drum assembly
EQ harness retainer
Drum harnesses
Edge holder
Send down the drum harnesses
into the reverse-side
side of the mechanical deck.
Drum
harness
PWH3
x
8
BVTT3
x
6
*
(6) Remove the two screws and remove the EQ
harness retainer.
(7) Open the edge holder.
(8) Sent down the harnesses (drum harnesses)
fixed by the edge holder into the reverse-side
side of the mechanical deck at the portion
*
fully as shown in the figure.
n
When raising the drum assembly, the drum
harnesses are drawn into the underside of the
mechanical deck. Therefore, slack off the
drum harnesses at the underside of the
mechanical deck in advance.
(9) Raise the drum assembly uprightly.
n
Be careful not to raise the drum assembly by
holding the brush slip ring assembly.
(10)Disconnect the three drum harnesses from the
three connectors of the drum assembly while
keeping state of step (9).
According the drum assembly can be re-
moved.
m
.
Be careful not to touch the drum assembly
to the AT head or peripheral tape guides.
.
Becareful not to touch the disconnected
harness to the AT head or peripheral tape
guides.
Remove the Drum Assembly