Remote Commands
R&S
®
Cable Rider ZPH
227
User Manual 1321.0950.02 ─ 03
SYSTem:POSition:VALid?
This command queries if the current position is valid.
Example:
SYST:POS:VAL?
Usage:
Query only
11.6.7.3
Display Configuration
This chapter describes commands to set up the display of the R&S Cable Rider ZPH
via remote control.
List of commands
●
●
●
●
DISPlay:BRIGhtness
<Brightness>
This command sets the brightness of the display backlight.
Parameters:
<Brightness>
Range:
0.01 to 1
*RST:
0.5
Example:
DISP:BRIG 0.80
Sets the brightness of the display to 80%.
DISPlay:CMAP
<ColorScheme>
This command sets the color scheme of the display.
Parameters:
<ColorScheme>
COLor | BW | PF
COLor
Color
BW
Black & white
PF
Printer-friendly
*RST:
COLor
Example:
DISP:CMAP BW
Sets the screen colors to black and white.
Remote Control - Commands
