Basic Operation
R&S
®
Cable Rider ZPH
40
User Manual 1321.0950.02 ─ 03
3. Confirm the entry with the rotary knob.
Activating the touchscreen interface
1. In the "Instrument Setup" dialog box, select the "Touch Interface" item.
2. Select "ON" to activate the touchscreen interface with R&S Cable Rider ZPH.
3. Select "OFF" to deactivate the touchscreen interface.
Note: If the touch interface is not activated, the
is disabled.
4.2.6 Configuring the Audio Output
The audio settings control the audio output of the system.
Setting the key click volume
The key click volume sets the volume of the sound that the R&S Cable Rider ZPH pro-
duces when you press a key or select a softkey.
1. In the "Instrument Setup" dialog box, select the "Key Click Volume" item.
2. Enter the volume you want with the numeric keys.
The key click volume is a percentage from 0% to 100% with 100% being the loud-
est.
3. Confirm the entry with the rotary knob.
Setting the system beeper volume
The system beeper volume sets the volume of the system beeper of the R&S Cable
Rider ZPH used, i.e. if a message box pops up.
1. In the "Instrument Setup" dialog box, select the "System Beeper Volume" item.
Configuring the R&S Cable Rider ZPH
