Performing Pulse Power Measurements
R&S
®
Cable Rider ZPH
154
User Manual 1321.0950.02 ─ 03
10.2.5 Selecting the Result Unit
In the pulse measurement application, the R&S R&S Cable Rider ZPH can display
measured power in relative units (dBm) or in absolute units (W).
1. Press the SCALE key.
2. Select the "Unit" softkey.
3. Select the unit you prefer.
The R&S Cable Rider ZPH adjusts the y-axis accordingly.
10.2.6 Scaling the Y-Axis
For more information, see
Chapter 7.2.3, "Configuring the Vertical Axis"
10.2.7 Using Markers
The Power vs Time diagram supports markers.
For more information, see
Chapter 7.3.2, "Using Markers"
marker functions are not available in the "Power Meter" mode).
Configuring the Power vs Time Result Display
