Remote Commands
R&S
®
Cable Rider ZPH
188
User Manual 1321.0950.02 ─ 03
It also transfers data from a file to a particular trace.
With
FORMat[:DATA]
command, you can set the data format.
The numeric suffix at TRACe selects the number of the trace.
Suffix:
<1...2>
.
1...2
Parameters:
<arg0>
TRACe1 | TRACe2 | LIST
TRACe1
Queries the data of trace 1.
TRACe2
Queries the data of trace 2.
LIST
Queries the peak list of the measurement.
The R&S Cable Rider ZPH returns 711 values. Each value cor-
responds to one pixel of a trace.
The unit depends on the measurement and the unit you have
set with
UNIT<1...2>:POWer
.
Note: If you use the auto peak detector, the command reads out
positive peak values only.
Example:
TRAC:DATA? TRACE1
Reads out the data for trace 1.
Usage:
Query only
UNIT<1...2>:LENGth
<LengthUnit>
This command selects the length unit.
The numeric suffix at UNIT is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<LengthUnit>
METer | FEET
METer
Selects meter as the length unit.
FEET
Selects feet as the length unit.
*RST:
METer
Example:
UNIT:LENGth FEET
Selects feet as the length unit.
Remote Control - Commands
