Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 220 / 314

Remote Commands
R&S
®
Cable Rider ZPH
185 User Manual 1321.0950.02 ─ 03
Parameters:
<TriggerSlope> POSitive | NEGative
*RST:
POSitive
Example: TRIG:SLOP NEG
TRIGger[:SEQuence]:SOURce <TriggerSource>
This command selects the trigger source.
Parameters:
<TriggerSource> IMMediate | EXTernal | VIDeo | INTernal
IMMediate
Selects Free Run measurements.
EXTernal
Selects an external trigger.
VIDeo
Selects the video trigger.
INTernal
Selects an internal trigger.
*RST:
IMMediate
For more information, see chapter "Setting the Sweep".
Example: TRIG:SOUR EXT
Selects the external trigger input as source of the trigger signal.
11.6.2.4 Working with Traces
The following commands set up the trace and the various functions associated with it,
e.g. trace mathematics or the selection of the detector.
List of commands
●
CALCulate<1...2>:MATH<1...2>:COPY:MEMory
on page 185
●
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MEMory[:STATe]
on page 186
●
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MODE
on page 186
●
FORMat[:DATA]
on page 187
●
TRACe<1...2>[:DATA]?
on page 187
●
UNIT<1...2>:LENGth
on page 188
CALCulate<1...2>:MATH<1...2>:COPY:MEMory [<MemorySlot>]
This command stores the selected trace into the memory trace of the R&S Cable Rider
ZPH.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
MATH selects the number of the trace.
Remote Control - Commands