Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 240 / 314

Remote Commands
R&S
®
Cable Rider ZPH
205 User Manual 1321.0950.02 ─ 03
Suffix:
<1...2>
.
1...2
Parameters:
<Return values> Maximum VSWR (no unit)
Example: CALC:TRAC:VSWR:MAX:STAT ON
CALC:TRAC:VSWR:MAX:RES?
Queries the maximum VSWR.
Usage: Query only
Calibrating the Measurement
The following commands control calibration of cable measurements.
●
CALibration<1...2>:ABORt
on page 205
●
CALibration<1...2>:ATTenuation:STATus?
on page 205
●
CALibration<1...2>:CONTinue?
on page 206
●
CALibration<1...2>:MODE?
on page 206
●
CALibration<1...2>:STARt?
on page 207
●
SYSTem:PRESet:CALibration:DISCard
on page 207
CALibration<1...2>:ABORt
This command aborts calibration.
The numeric suffix at CALibration is irrelevant for this command.
This command is an event and therefore has no query and no *RST value.
Suffix:
<1...2>
.
1...2
Example: CAL:ABOR
Aborts calibration.
Usage: Event
CALibration<1...2>:ATTenuation:STATus?
This command queries the current calibration state.
The numeric suffix at CALibration is irrelevant for this command.
This command is a query and therefore has no *RST value.
Suffix:
<1...2>
.
1...2
Remote Control - Commands