Power Meter
R&S
®
Cable Rider ZPH
136
User Manual 1321.0950.02 ─ 03
2
Only these power sensors support the trace mode (power versus time display)
For more information on the characteristics of the supported power sensors, see the
following:
●
The datasheet of the R&S Cable Rider ZPH.
●
The website for R&S power sensors.
http://www.rohde-schwarz.com/en/products/test_and_measurement/power_volt_meter/
NRPZ.html
1. Press the MODE key.
2. Select the "Power Meter" softkey
The R&S Cable Rider ZPH activates the mode for power measurements.
Figure 8-1: Screen layout of the power meter mode
1 = Connected power sensor model
2 = Measurement time
3 = Power offset
4 = Readout of the measured power
5 = Analog readout of the measured power
6 = Measurement frequency
7 = Configuration overview icon
8 = Power sensor softkey menu
8.1.1 Connecting a Power Sensor
The R&S Cable Rider ZPH controls and powers the power sensors via the USB inter-
face on the top of the instrument. See
Using a Power Sensor
