Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 257 / 314

Remote Commands
R&S
®
Cable Rider ZPH
222 User Manual 1321.0950.02 ─ 03
Usage: Event
MMEMory:NAME <FileName>
This command defines the path and filename that the R&S Cable Rider ZPH uses for
storing screenshots (see
HCOPy[:IMMediate]
on page 221). The path and filename
comply with DOS conventions.
This command is an event and therefore has no *RST value and no query.
Parameters:
<FileName> String containing the filename.
Example: MMEM:NAME 'Public\Screeshots\Test.png'
Stores the screenshot in the corresponding directory on the R&S
Cable Rider ZPH.
11.6.6 Configuring Data Capture
The following commands configure the data capture.
These commands are independent from the operating mode.
List of commands
●
SYSTem:CAPTure:COUNter
on page 222
●
SYSTem:CAPTure:DATaset[:STATe]
on page 222
●
SYSTem:CAPTure:MODE
on page 223
●
SYSTem:CAPTure:SCReen[:STATe]
on page 223
SYSTem:CAPTure:COUNter <CaptureCounter>
This command defines the start of the filename counter.
The counter numbers the files stored when you capture data (screenshots, datasets
etc.).
Parameters:
<CaptureCounter> String containing the number with which to start numbering files.
*RST:
'0000'
Example: SYST:CAPT:COUN '0100'
Starts numbering files with 0100, e.g. Measurement0100.png.
SYSTem:CAPTure:DATaset[:STATe] <State>
This command includes or excludes datasets from the data capture.
Parameters:
<State> ON | OFF
*RST:
OFF
Remote Control - Commands