Remote Commands
R&S
®
Cable Rider ZPH
189
User Manual 1321.0950.02 ─ 03
11.6.2.5
Using Markers
The following commands control the operation of marker, delta markers and marker
functions.
Markers and Delta Markers
The following commands are for setting and controlling markers and deltamarkers.
List of commands
●
CALCulate<1...2>:DELTamarker<1...6>[:STATe]
●
CALCulate<1...2>:DELTamarker<1...6>:AOFF
●
CALCulate<1...2>:DELTamarker<1...6>:MAXimum[:PEAK]
●
CALCulate<1...2>:DELTamarker<1...6>:MAXimum:NEXT
●
CALCulate<1...2>:DELTamarker<1...6>:MINimum[:PEAK]
●
CALCulate<1...2>:DELTamarker<1...6>:X
●
CALCulate<1...2>:DELTamarker<1...6>:X:RELative
●
CALCulate<1...2>:DELTamarker<1...6>:Y?
●
CALCulate<1...2>:MARKer<1...6>[:STATe]
●
CALCulate<1...2>:MARKer<1...6>:AOFF
●
CALCulate<1...2>:MARKer<1...6>:MAXimum[:PEAK]
●
CALCulate<1...2>:MARKer<1...6>:MAXimum:NEXT
●
CALCulate<1...2>:MARKer<1...6>:MINimum[:PEAK]
●
CALCulate<1...2>:MARKer<1...6>:X
●
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>[:STATe]
●
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>:LEFT
●
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>:RIGHt
●
CALCulate<1...2>:MARKer<1...6>:Y?
CALCulate<1...2>:DELTamarker<1...6>[:STATe]
<State>
This command turns delta markers on and off.
If you set the suffix at DELTamarker to 1, or use no suffix, the R&S Cable Rider ZPH
interprets this as delta marker 2 because the first marker has to be a normal marker. If
more than one normal marker (2 to 6) is already active, the command turns these
markers into delta markers. If no delta marker is active yet, the command activates the
delta marker and positions it on the trace maximum.
The numeric suffix at CALCulate selects the trace. The numeric suffix at DELTamarker
selects the deltamarker.
Remote Control - Commands
