Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 248 / 314

Remote Commands
R&S
®
Cable Rider ZPH
213 User Manual 1321.0950.02 ─ 03
Parameters:
<Detector> AVERage | PENVelope
AVERage
Displays the average power.
PENVelope
Displays the peak envelope power.
*RST:
-
Example: PMET:DET AVER
Selects the Average weighting mode.
11.6.3.6 Defining the Video Bandwidth
Selecting a video bandwidth is only possible when you are measuring the peak enve-
lope power with the R&S FSH-Z44 power sensor based on a customized (= user) stan-
dard.
See the following commands for more information about these conditions:
●
[SENSe:]PMETer:DETector[:FUNCtion]
on page 212
●
CALCulate<1...2>:PMETer:PRESet[:STATe]
on page 214
●
CALCulate<1...2>:PMETer:PRESet:SELect
on page 214
List of commands
●
CALCulate<1...2>:PMETer:PRESet:BANDwidth:VIDeo
on page 213
CALCulate<1...2>:PMETer:PRESet:BANDwidth:VIDeo <VideoBW>
This command defines the video bandwidth of the R&S FSH-Z44 power sensor.
The numeric suffix at CALCulate is irrelevant for this command.
Parameters:
<VideoBW> Default unit: GHz
Example: CALC:PMET:PRES:BAND:VID 10MHZ
Defines a video bandwidth of 10 MHz.
11.6.3.7 Reading Out Measurement Results
List of commands
●
FETCh<1...2>:PMETer
on page 213
FETCh<1...2>:PMETer
This command queries the results of measurements with the power sensor.
Remote Control - Commands