Basic Operation
R&S
®
Cable Rider ZPH
42
User Manual 1321.0950.02 ─ 03
3. Confirm the entry with the rotary knob.
Activating / Deactivating audio alert for battery low-level state
The R&S Cable Rider ZPH also allows you to turn on an audio signal that indicates
that the battery has reached its low-level state.
1. In the "Instrument Setup" dialog box, select the "Battery Low Level Beep" item.
2. Select either "Repetitive" or "Once" to turn on the audio signal.
If you have selected "Once", the R&S Cable Rider ZPH beeps once if the battery
runs out of power. For a continuous beep, select "Repetitive".
3. Select "Off" to turn off the beeper.
4.2.8 Performing Default Calibration
Factory Calibration
It is not possible to recover the overwritten default calibration performed in factory.
The first default calibration is performed in the factory. You can overwrite this default
calibration. For more information, see
Chapter 7.1.6, "Calibrating Measurements"
1. In the "Instrument Setup" dialog box, select the "Perform Default Calibration" item.
2. Select "Calibrate" to perform the default calibration.
Configuring the R&S Cable Rider ZPH
