Basic Operation
R&S
®
Cable Rider ZPH
49
User Manual 1321.0950.02 ─ 03
7. Select the new connection labeled R&S Cable Rider ZPH.
8. Select the "Connect" button to establish the connection.
Connecting the R&S Cable Rider ZPH in an existing LAN
You can either get the R&S Cable Rider ZPH IP address automatically from the DHCP
server or manually assign a fixed address.
With manual allocation, a fixed IP address and subnet mask must be assigned to the
R&S Cable Rider ZPH as described in
Chapter 4.3.1, "LAN Connection"
After setting up the R&S Cable Rider ZPH, configure the R&S InstrumentView software
with the assigned IP address as described in
"Configuring the R&S InstrumentView
Free IP address
Contact your IT system administrator to get a free IP address.
In networks with a DHCP server, DHCP permits automatic allocation of the network
configuration to the R&S Cable Rider ZPH connected via LAN cable. For this purpose,
DHCP has to be active on the R&S Cable Rider ZPH.
DHCP is off by default. Turn it on like this:
1. In the "Instrument Setup" dialog box, select the "DHCP" item.
2. Select "DHCP" to "On" to activate DHCP.
Connecting the R&S Cable Rider ZPH to a PC
