Getting Started
R&S
®
Cable Rider ZPH
23
User Manual 1321.0950.02 ─ 03
USB type A connector
The USB port provides the USB interface to connect a memory stick and store data
sets or screenshots. It can also be used to control the operation of the external power
sensor.
RF out / Reflection
The RF out connector provides a signal source output power of the R&S Cable Rider
ZPH at -10.00 dBm nominal. It is also used as a 1-port reflection measurement.
Risk of electrical shock
To avoid electrical shock, the DC input voltage must never exceed the value specified
on the housing.
Risk of instrument damage
●
Make sure not to overload the RF input and keep within the maximum allowed sig-
nal levels. Refer to the datasheet for the maximum allowed signal levels.
●
To avoid damage to the coupling capacitor, input attenuator or the mixer, the DC
input voltage of 50 V must never be exceeded.
3.2.3 Left View
1 = DC input
2 = Kensington lock slot
DC input
The R&S Cable Rider ZPH is supplied with power by the AC/DC transformer power
supply via the DC connector. You can also use the DC connector to charge the battery.
Kensington lock slot
A Kensington lock can be anchored to the R&S Cable Rider ZPH housing to secure it
to a workstation mechanically.
Instrument Tour
