Basic Operation
R&S
®
Cable Rider ZPH
50
User Manual 1321.0950.02 ─ 03
The R&S Cable Rider ZPH is now allocated an IP address and the subnet mask by the
DHCP server. This can take several seconds.
The IP address and subnet mask are automatically set in the corresponding input fields
and are no longer available for editing.
Configure the R&S InstrumentView software with the IP address and subnet mask as
defined by the DHCP server. For more information, see
4.3.2 USB Connection
Alternatively, you can connect the R&S Cable Rider ZPH to the PC with a USB cable.
The
is located behind a protective cap on the right side of the R&S
Cable Rider ZPH.
When you connect the R&S Cable Rider ZPH to a computer for the first time, Windows
tries to install the new hardware automatically. The required drivers are installed along
with the R&S InstrumentView software package.
When the drivers have been found on your system and the hardware has been suc-
cessfully installed, Windows shows a corresponding message.
1. Connect the R&S Cable Rider ZPH via the mini USB port to your computer.
2. Start R&S InstrumentView on the PC.
3. Select the "USB" tab in the screen layout.
Connecting the R&S Cable Rider ZPH to a PC
