Preface
R&S
®
Cable Rider ZPH
9
User Manual 1321.0950.02 ─ 03
1 Preface
1.1 Documentation Overview
This section provides an overview of the R&S Cable Rider ZPH user documentation.
You find it on the product page at:
http://www.rohde-schwarz.com/product/zph.html
> "Downloads"
Getting started manual
Introduces the R&S Cable Rider ZPH and describes how to set up and start working
with the product. A printed version is included in the delivery.
User manual
The user manual contains the description of all instrument modes and functions. It also
provides an introduction to remote control, a complete description of the remote control
commands with programming examples, and information on maintenance, instrument
interfaces and error messages.
In addition to the R&S Cable Rider ZPH user manual, there is a separate user manual
for the InstrumentView software package. This manual contains a description of all fea-
tures of the InstrumentView software package.
Service manual
Describes the performance test for checking the rated specifications, module replace-
ment and repair, firmware update, troubleshooting and fault elimination, and contains
mechanical drawings and spare part lists.
The service manual is available for registered users on the global Rohde
&
Schwarz
https://gloris.rohde-schwarz.com
).
Basic safety instructions
Contains safety instructions, operating conditions and further important information.
The printed document is included in the delivery.
Data sheet and brochure
The data sheet contains the technical specifications of the R&S Cable Rider ZPH. It
also lists the options and their order numbers as well as optional accessories.
The brochure provides an overview of the R&S Cable Rider ZPH and shows its specific
characteristics.
Calibration certificate
https://gloris.rohde-schwarz.com/calcert
Documentation Overview
