Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 264 / 314

Remote Commands
R&S
®
Cable Rider ZPH
229 User Manual 1321.0950.02 ─ 03
SYSTem:BEEPer:KEY:VOLume <Volume>
This command sets the volume of the keyboard click noise.
Parameters:
<Volume> Range: 0 to 1
*RST: 0.3
Example: SYST:BEEP:KEY:VOL 0.10
Sets of keyboard clicking volume to 10%.
11.6.7.5 Setting up a Network Connection
This chapter describes all commands that are used if the R&S Cable Rider ZPH is part
of a network.
List of commands
●
SYSTem:COMMunicate:LAN:ETHernet
on page 229
●
SYSTem:COMMunicate:LAN:GATeway
on page 229
●
SYSTem:COMMunicate:LAN:SUBMask
on page 229
●
SYSTem:COMMunicate:SOCKet:ADDRess
on page 230
●
SYSTem:COMMunicate:SOCKet:DHCP[:STATe]
on page 230
●
SYSTem:COMMunicate:SOCKet:PORT
on page 230
SYSTem:COMMunicate:LAN:ETHernet
This command queries the MAC address of the R&S Cable Rider ZPH.
This command is a query and therefore has no *RST value.
Example: SYST:COMM:LAN:ETH?
Returns the MAC address.
SYSTem:COMMunicate:LAN:GATeway <Gateway>
This command sets the gateway in the LAN.
Parameters:
<Gateway> String containing the identifier of the gateway.
SYSTem:COMMunicate:LAN:SUBMask <Submask>
This command sets the subnet mask of the R&S Cable Rider ZPH
Parameters:
<Submask> String containing the subnet mask ('x.x.x.x').
*RST:
255.255.255.0
Example: SYST:COMM:LAN:SUBM '255.255.255.0'
Sets the subnet mask address to 255.255.255.0.
Remote Control - Commands