This document describes the following R&S
®
Cable Rider ZPH model and options:
●
R&S
®
ZPH (1321.1211.02)
●
R&S
®
ZPH-B4, Frequency extension to 4 GHz, (1321.0380.02)
●
R&S
®
ZPH-B10, GPS support, (1321.0396.02)
●
R&S
®
ZPH-K9, Power sensor support, (1321.0415.02)
●
R&S
®
ZPH-K19, Power meter, (1321.0409.02)
●
R&S
®
ZPH-K29, Pulse measurements with power sensor, (1321.0421.02)
●
R&S
®
ZPH (1321.1211.52, equivalent 1321.1211.02)
The contents of this manual correspond to firmware version 1.20 or higher.
The software contained in this product makes use of several valuable open source software packages. For information, see the
"Open Source Acknowledgement" document, which is available for download from the R&S Cable Rider ZPH product page at http://
www.rohde-schwarz.com/product/zph.html > "Downloads" > "Firmware".
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embedded computing.
© 2017 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email:
Internet:
Subject to change – Data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of their owners.
Throughout this manual, products from Rohde & Schwarz are indicated without the
®
symbol , e.g. R&S
®
Cable Rider ZPH is indica-
ted as R&S
Cable Rider ZPH.
