Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 258 / 314

Remote Commands
R&S
®
Cable Rider ZPH
223 User Manual 1321.0950.02 ─ 03
Example: SYST:CAPT:DAT ON
Includes datasets into the data capture.
SYSTem:CAPTure:MODE <CaptureMode>
This command selects the data types that the R&S Cable Rider ZPH saves when you
capture the current measurement data.
Parameters:
<CaptureMode> SCReen | DATaset | BOTH
SCReen
Saves a screenshot.
DATaset
Saves a dataset.
BOTH
Saves a screenshot and a dataset.
*RST:
SCReen
Example: SYST:CAPT:MODE BOTH
Captures both a screenshot and a dataset of the current mea-
surement.
SYSTem:CAPTure:SCReen[:STATe] <State>
This command includes or excludes screenshots from the data capture.
Parameters:
<State> ON | OFF
*RST:
ON
Example: SYST:CAPT:SCR ON
Includes screenshots into the data capture.
11.6.7 Configuring the Instrument
The following commands configure general instrument settings.
These commands are independent from the operating mode.
Contents
●
Chapter 11.6.7.1, "Mode Selection" , on page 224
●
Chapter 11.6.7.2, "Controlling the GPS Receiver" , on page 225
●
Chapter 11.6.7.3, "Display Configuration" , on page 227
●
Chapter 11.6.7.4, "Audio Settings" , on page 228
●
Chapter 11.6.7.5, "Setting up a Network Connection" , on page 229
●
Chapter 11.6.7.6, "System Settings" , on page 230
Remote Control - Commands