Remote Commands
R&S
®
Cable Rider ZPH
228
User Manual 1321.0950.02 ─ 03
DISPlay:CMAP:DEFault
This command sets the display to the default state.
This command is an event and therefore has no query and no *RST value.
Example:
DISP:CMPA:DEF
Restores the original color scheme.
Usage:
Event
DISPlay:DATE:FORMat
<DateFormat>
This command sets the display date format.
Parameters:
<DateFormat>
DDMMyyyy | MMDDyyyy
*RST:
DDMMyyyy
Example:
DISP:DATE:FORM DDMMyyyy
11.6.7.4
Audio Settings
This chapter describes all commands to control the audio functions of the R&S Cable
Rider ZPH.
List of commands
●
●
●
SYSTem:AUDio:VOLume
<Volume>
This command sets the volume of the internal speaker.
Parameters:
<Volume>
Range:
0 to 1
*RST:
0.3
Example:
SYST:AUD:VOL 0.40
Sets the volume to 40%.
SYSTem:BEEPer:VOLume
<Volume>
This command sets the volume of the system beeper.
Parameters:
<Volume>
Range:
0 to 1
*RST:
0.3
Example:
SYST:BEEP:VOL 0.50
Sets the volume of the beeper to 50%.
Remote Control - Commands
