Getting Started
R&S
®
Cable Rider ZPH
17
User Manual 1321.0950.02 ─ 03
3.1.1.4
Using the AC Adapter
Risk of instrument damage
To avoid instrument damage,
●
Only use the power supply (R&S HA-Z301, order number 1321.1386.02) included
in the delivery.
●
Make sure that the AC supply voltage is compatible to the voltage specified on the
power supply unit.
●
Attach the appropriate adapter to the power supply.
Connect the AC adapter to the DC port on the left side of the R&S Cable Rider ZPH
(item 1 of
). Make sure to fully insert the AC adapter plug into the DC port.
Depending on the system you need, firmly connect the appropriate power cable inclu-
ded in the delivery to the AC adapter (item 2 of
Finally, connect the power cable plug to an AC power outlet.
Figure 3-1: AC adapter
1 = AC adapter
2 = Power cable
The voltage range of the AC power supply is 100 V to 240 V AC.
After the R&S Cable Rider ZPH is connected to the power supply, you can turn it on
with the POWER key on the front panel.
Preparing for Use
