Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 266 / 314

Remote Commands
R&S
®
Cable Rider ZPH
231 User Manual 1321.0950.02 ─ 03
●
SYSTem:ERRor:CODE:ALL?
on page 233
●
SYSTem:ERRor:COUNt?
on page 233
●
SYSTem:FORMat:IDENt
on page 234
●
SYSTem:HELP:HEADers?
on page 234
●
SYSTem:HELP:SYNTax?
on page 234
●
SYSTem:LANGuage
on page 234
●
SYSTem:LANGuage:CATalog?
on page 235
●
SYSTem:POWer:SOURce?
on page 235
●
SYSTem:POWer:STATus?
on page 235
●
SYSTem:PRESet
on page 235
●
SYSTem:PRESet:FACTory
on page 235
●
SYSTem:PRESet:MODE
on page 236
●
SYSTem:PRESet:USER
on page 236
●
SYSTem:REBoot
on page 236
●
SYSTem:SHUTdown
on page 236
●
SYSTem:TZONee
on page 237
●
SYSTem:VERSion?
on page 237
INPut:IMPedance:PAD <PadType>
This command selects the matching pad connected to the R&S Cable Rider ZPH.
Parameters:
<PadType> RAM | RAZ | HZTE
Example: INPut:IMP 75;PAD RAZ
Selects 75 Ω input impedance and the R&S RAZ as the match-
ing pad.
[SENSe:]ROSCillator:SOURce <Format>
This command selects the source of the frequency reference oscillator.
If you use an external reference signal, make sure to connect the signal to the Ext Ref
BNC connector of the R&S Cable Rider ZPH.
Parameters:
<Format> INTernal | EXTernal
INTernal
Internal reference.
EXTernal
External reference.
Example: ROSC:SOUR EXT
Activates external source as reference signal.
Remote Control - Commands