manualshive.com logo in svg

Rohde & Schwarz Cable Rider ZPH, User Manual

Share
Download
Rohde & Schwarz Cable Rider ZPH User Manual Download Page 57

Getting Started

R&S

®

Cable Rider ZPH

22

User Manual 1321.0950.02 ─ 03

1 =

Power meter input (N-connector)

2 =

USB ports

3 =

Signal source output / Reflection (N-connector)

4 =

Touch-sensitive screen area

5 = Softkey labels (on display)
6 = Softkey
7 = Systems keys
8 =

DC port (behind protective cap)

9 =

Kensington lock

10 = Function keys
11 = On/off key
12 = Alphanumeric key
13 = Unit keys
14 = Back key
15 = Cancel key
16 = Rotary knob
17 = Screenshot key
18 =

LAN and mini USB port (behind protective cap)

19 =

Micro-SD card slot (not visible as it is located behind the battery compartment)

For a description of the keys, see R&S Cable Rider ZPH user manual.

Instrument damage caused by cleaning agents

Cleaning agents contain substances that may damage the instrument. For example,
cleaning agents that contain a solvent may damage the front panel labeling, plastic
parts, or the display.
Never use cleaning agents such as solvents (thinners, acetone, etc.), acids, bases, or
other substances.
The outside of the instrument can be cleaned sufficiently using a soft, lintfree dust
cloth.

3.2.2 Top View

Power meter input

The build-in power-meter provides a maximum power measurement of 30 dBm (or 1
W) at the RF input port. Connect a cable or DUT to the RF input with an N-type con-
nector. Use a cable to connect the DUT to the R&S Cable Rider ZPH, if necessary.

 

Instrument Tour

Summary of Contents for Cable Rider ZPH



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands