Basic Operation
R&S
®
Cable Rider ZPH
43
User Manual 1321.0950.02 ─ 03
The R&S Cable Rider ZPH shows a warning message box.
3. A corresponding dialog box opens for selection.
● Select "Yes" to perform the default calibration.
● Select "No" to cancel the calibration.
4. After calibration, the R&S Cable Rider ZPH updates the "Last Calibration Date",
"Last Calibration Frequency", "Last Calibration" and "Last Cal Kit" information.
4.2.9 Configuring Calibration Kit Model
The calibration kit setting loads the selected calibration kit model from the file manager.
For a list of supported calibration kits model by the R&S Cable Rider ZPH, see
ter 7.1.6.2, "Calibration Methods"
1. In the "Instrument Setup" dialog box, select the "Calibration Kit" item.
The R&S Cable Rider ZPH opens a file manager dialog to select the calibration kit
model.
2. Select the calibration kit model that you require.
Configuring the R&S Cable Rider ZPH
