Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 247 / 314

Remote Commands
R&S
®
Cable Rider ZPH
212 User Manual 1321.0950.02 ─ 03
List of commands
●
[SENSe:]PMETer:MTIMe
on page 212
[SENSe:]PMETer:MTIMe <MeasTime>
This command sets the duration of measurements.
Available for measurements with a power sensor.
Parameters:
<MeasTime> SHORt | NORMal | LONG
Example: PMET:MTIMe SHOR
Sets a short measurement time for power measurements.
11.6.3.4 Zeroing of the Power Sensor
List of commands
●
CALibration<1...2>:PMETer:ZERO:AUTO
on page 212
CALibration<1...2>:PMETer:ZERO:AUTO <ONCE>
This command starts to zero the power sensor.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALibration is irrelevant for this command.
Parameters:
<ONCE> ONCE
Example: CAL:PMET:ZERO:AUTO ONCE
Starts to zero the power meter.
11.6.3.5 Forward Power Display
Note that the forward power is only available in conjunction with the R&S FSH-Z14 or
R&S FSH-Z44.
List of commands
●
[SENSe:]PMETer:DETector[:FUNCtion]
on page 212
[SENSe:]PMETer:DETector[:FUNCtion] <Detector>
This command selects the forward power display of the power sensor.
Remote Control - Commands