Remote Commands
R&S
®
Cable Rider ZPH
203
User Manual 1321.0950.02 ─ 03
CALCulate<1...2>:TRACe:VSWR:MAX[:STATe]
<State>
This command turns the display of the maximum and average VSWR on and off.
Use
CALCulate<1...2>:TRACe:VSWR:AVG:RESult?
CALCulate<1...2>:TRACe:VSWR:MAX:RESult?
on page 204 to query the corre-
sponding results.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<State>
ON | OFF
ON
Turns on the display of the maximum and average VSWR.
OFF
Turns off the display of the maximum and average VSWR.
*RST:
OFF
Example:
CALC:TRAC:VSWR:MAX:STAT ON
Displays the VSWR results.
MEASurement<1...2>:FORMat
<MeasFormat>
This command selects the measurement format.
The numeric suffix at MEASurement is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<MeasFormat>
MAGNitude | PHASe | VSWR | REFLection | SMITh | LOSS
MAGNitude
Selects the magnitude format.
PHASe
Selects the phase format.
VSWR
Selects the VSWR format.
REFLection
Selects the reflection coefficient format.
SMITh
Selects the smith chart.
LOSS
Selects the cable loss format.
*RST:
MAGNitdue
Example:
MEAS:FORM SMIT
Displays the reflection in a Smith Chart.
Remote Control - Commands
