Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 234 / 314

Remote Commands
R&S
®
Cable Rider ZPH
199 User Manual 1321.0950.02 ─ 03
Usage: Query only
CALCulate<1...2>:LIMit<1...2>:STATe <State>
This command turns a limit check on and off.
You can query the result of the limit check with
CALCulate<1...2>:
LIMit<1...2>:FAIL?
on page 198.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:LIM:STAT ON
Switches on the limit check for limit line 1.
CALCulate<1...2>:LIMit<1...2>:UNIT:X?
This command queries the horizontal unit of a limit line.
This command is a query and therefore has no *RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2> 1...2
Example: CALC:LIM:UNIT:X?
Queries the x-unit of the first limit line.
Usage: Query only
CALCulate<1...2>:LIMit<1...2>:UNIT[:Y]?
This command queries the vertical unit of a limit line.
This command is a query and therefore has no *RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2> 1...2
Example: CALC:LIM1:UNIT?
Queries the y-unit of the first limit line.
Usage: Query only
Remote Control - Commands