Remote Commands
R&S
®
Cable Rider ZPH
200
User Manual 1321.0950.02 ─ 03
CALCulate<1...2>:LIMit<1...2>:LOWer:SELect
<LimitLine>
This command selects the lower limit line.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
Parameters:
<LimitLine>
String containing the filename of the lower limit line.
Example:
CALC:LIM:LOW:SEL 'GSM_Lower.rellim'
Selects the lower limit line.
Usage:
Setting only
CALCulate<1...2>:LIMit<1...2>:UPPer:SELect
<LimitLine>
This command selects the upper limit line.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
Parameters:
<LimitLine>
String containing the filename of the upper limit line.
Example:
CALC:LIM:UPP:SEL 'GSM_Upper.rellim'
Selects the upper limit line.
Usage:
Setting only
CALCulate<1...2>:LIMit<1...2>:LOWer:THReshold
<Threshold>
This command defines the level of a lower threshold limit line.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
Remote Control - Commands
