Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 265 / 314

Remote Commands
R&S
®
Cable Rider ZPH
230 User Manual 1321.0950.02 ─ 03
SYSTem:COMMunicate:SOCKet:ADDRess <IPAddress>
This command sets the IP address of the R&S Cable Rider ZPH.
Parameters:
<IPAddress> String containing the IP address ('x.x.x.x').
*RST:
172.76.68.24
Example: SYST:COMM:SOCK:ADDR '172.76.68.30'
Sets the IP address of theR&S Cable Rider ZPH to
172.76.68.30.
SYSTem:COMMunicate:SOCKet:DHCP[:STATe] <State>
This command turns the Dynamic Host Configuration Protocol (DHCP) on and off.
Parameters:
<State> ON | OFF
*RST:
ON
Example: SYST:COMM:SOCK:DHCP ON
Activates DHCP.
SYSTem:COMMunicate:SOCKet:PORT <Port>
This command sets the port number for the connection.
Parameters:
<Port> Port number.
*RST:
5555
Example: SYST:COMM:SOCK:PORT 1000
Sets the port number to 1000.
11.6.7.6 System Settings
This chapter describes all commands that define or query general system settings.
List of commands
●
INPut:IMPedance:PAD
on page 231
●
[SENSe:]ROSCillator:SOURce
on page 231
●
SYSTem:ACCessory
on page 232
●
SYSTem:ACCessory:AUTO
on page 232
●
SYSTem:BNC:MODE
on page 232
●
SYSTem:DATE
on page 232
●
SYSTem:ERRor[:NEXT]?
on page 233
●
SYSTem:ERRor:ALL?
on page 233
●
SYSTem:ERRor:CODE[:NEXT]?
on page 233
Remote Control - Commands