Basic Operation
R&S
®
Cable Rider ZPH
34
User Manual 1321.0950.02 ─ 03
Location to secure GPS receiver (R&S HA-Z340)
Figure 4-2: Location of GPS receiver
●
Tighten the knob screw supplied with the GPS receiver to the screw track at the
back of R&S Cable Rider ZPH.
●
The GPS receiver can be conveniently attached to the knob screw as shown in
GPS reference frequency
The reference frequency is automatically adjusted when the GPS receiver is enabled
and a fix connection with enough satellites is established.
The "Instrument Setup" dialog box provides all settings necessary to configure the
GPS receiver.
Enabling the GPS receiver
1. In the "Instrument Setup" dialog box, select the "GPS" item.
A drop-down menu opens to turn the GPS receiver on or off.
2. Turn the GPS receiver on or off as required.
When "GPS" item is turned on, the R&S Cable Rider ZPH is ready to receive GPS
data.
Displaying GPS information
1. In the "Instrument Setup" dialog box, select the "Show GPS Information" item.
Configuring the R&S Cable Rider ZPH
