Basic Operation
R&S
®
Cable Rider ZPH
41
User Manual 1321.0950.02 ─ 03
2. Enter the volume you want with the numeric keys.
The system beeper volume is a percentage from 0% to 100% with 100% being the
loudest.
3. Confirm the entry with the rotary knob.
Activating / Deactivating audio alert for power overload
In case the R&S Cable Rider ZPH detects an overload at one of its inputs, you can
configure it to make a sound.
1. In the "Instrument Setup" dialog box, select the "Beep on Power Overload" item.
2. Select "Beep on Power Overload" to "On".
When this beeper turns on, the R&S Cable Rider ZPH makes a sound every time it
detects an overload.
4.2.7 Configuring Power Supply
The "Current Power Source" shows the source that the R&S Cable Rider ZPH is pow-
ered by.
When you are using the battery to power up the R&S Cable Rider ZPH, the remaining
"Battery Level" is displayed as a percentage with 100 % representing a full charge.
Setting the battery low level
The battery low level is a reminder that the remaining battery charge might be used up
soon.
When the battery low level is reached, the battery symbol in the
starts blinking. See
Chapter 3.1.1.5, "Battery Operation"
1. In the "Instrument Setup" dialog box, select the "Battery Low Level" item.
2. Enter the charge level in percent of a fully charged battery with the numeric keys.
Configuring the R&S Cable Rider ZPH
