Basic Operation
R&S
®
Cable Rider ZPH
33
User Manual 1321.0950.02 ─ 03
Performing Default Calibration
................................................................................42
Configuring Calibration Kit Model
............................................................................43
Resetting the R&S Cable Rider ZPH
...................................................................... 44
4.2.1 Configuring the Hardware
The hardware settings contain settings that control internal and connected hardware.
Using auto accessory detection
If you are using any accessories while working with the R&S Cable Rider ZPH, the
instrument is able to identify the connected hardware. To enable this setting:
1. In the "Instrument Setup" dialog box, select the "Auto Accessory Detection" item.
A drop-down menu to select the accessory detection opens.
2. Set the "Auto Accessory Detection" to "On".
When this feature is on, the name of the connected accessory is displayed in the
"Detected Accessory" field.
4.2.2 Using the GPS Receiver
R&S Cable Rider ZPH option
The R&S ZPH-B10 (order number 1321.0396.02) option is required to activate the
internal built-in GPS receiver to locate the exact position of the measurement.
Alternatively, you can connect the GPS receiver (R&S HA-Z340, order number
1321.1392.02) to the USB connector.
When locating the exact position, the external GPS receiver takes precedence over the
internal built-in GPS receiver.
Configuring the R&S Cable Rider ZPH
