Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 109 / 314

Instrument Functions
R&S
®
Cable Rider ZPH
74 User Manual 1321.0950.02 ─ 03
5.3.3 Softkey
The six softkeys on the front panel are used to access the softkey label. See Chap-
ter 3.2.1, "Front View" , on page 21.
The softkey label is function-specific depending on the key selected on the front panel
of the instrument. See
Chapter 5.3.5, "Function Keys" , on page 74.
5.3.4 System Keys
System keys configure the instrument to a predefined state, change basic settings,
configure evaluation setting and provide save and recall functions.
SYSTEM keys Descriptions
PRESET Resets the instrument to the default state.
SETUP Provides basic instrument configuration functions:
●
Date, time, display, audio and regional configuration
●
Battery low indicator
●
LAN interface
●
Disabling and enabling of options
●
Information about instrument configuration including firm-
ware version and system error messages
MODE Provides the selection between applications.
●
Cable & Antenna
●
Power Meter
LINES Configures display lines and limit lines.
SAVE RECALL Provides a file manager function to facilitate the saving and
recalling of result and instrument settings.
5.3.5 Function Keys
Function keys provide access to the most common measurement settings and func-
tions in the instrument.
Front Panel Keys