Getting Started
R&S
®
Cable Rider ZPH
16
User Manual 1321.0950.02 ─ 03
When laid out horizontally for operation from above, the R&S Cable Rider ZPH is tilted
slightly due to the micro-stand at the back. This position provides the optimum viewing
angle for the display.
To allow easy operation from the front and still be able to read the display, you can
swing out the support on the back of the R&S Cable Rider ZPH.
Before you turn on the R&S Cable Rider ZPH, you should insert the lithium ion battery
included in the delivery into the battery compartment located at the back of the R&S
Cable Rider ZPH.
Insert battery
1. Unscrew the two thumb screws located on the battery compartment.
2. Open the cover.
3. Insert the battery into the R&S Cable Rider ZPH.
4. Close the cover and screw back the thumb screws.
You can operate the R&S Cable Rider ZPH with the AC adapter or the battery. Both
are included in the delivery.
Preparing for Use
