Remote Commands
R&S
®
Cable Rider ZPH
193
User Manual 1321.0950.02 ─ 03
The numeric suffix at CALCulate selects the trace. The numeric suffix at MARKer
selects the marker.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:MARK3 ON
Turns on marker 3.
CALCulate<1...2>:MARKer<1...6>:AOFF
This command turns off all active markers, delta markers and active marker measure-
ment functions.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at CALCulate selects the trace. The numeric suffix at MARKer is
irrelevant for this command.
Example:
CALC:MARK:AOFF
Switches off all markers.
Usage:
Event
CALCulate<1...2>:MARKer<1...6>:MAXimum[:PEAK]
This command positions a marker on the current trace maximum.
If necessary, the corresponding marker is activated first.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate selects the trace. The numeric suffix at MARKer
selects the marker.
Example:
CALC:MARK2:MAX
Moves marker 2 to the maximum peak.
Usage:
Event
CALCulate<1...2>:MARKer<1...6>:MAXimum:NEXT
This command positions a marker on the next smaller trace maximum.
If necessary, the corresponding marker is activated first.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate selects the trace. The numeric suffix at MARKer
selects the marker.
Example:
CALC:MARK2:MAX:NEXT
Moves marker 2 to the next smaller maximum peak.
Usage:
Event
Remote Control - Commands
