Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 65 / 314

Basic Operation
R&S
®
Cable Rider ZPH
30 User Manual 1321.0950.02 ─ 03
Parameter Description
"REF" Configure the reference level of the measurement.
See Chapter 7.2.3, "Configuring the Vertical Axis" ,
on page 121.
"Points" Configure the number of measurement points.
See Chapter 7.2.4.2, "Changing the Number of
Measurement Points" , on page 123.
"Trace" Toggle the trace parameter to select the different
trace mode (Clear, Avg).
See Chapter 7.3.1, "Working with Traces" ,
on page 124.
Configure Overview Display the configuration overview window for more
configuration options used in the measurement.
Configuration overview is operation mode depend-
ent.
See Chapter 4.1.4.1, "Configuration Overview" ,
on page 30.
4.1.4.1 Configuration Overview
This is a dedicated button located at the bottom of the "Parameter View". It is operation
mode dependent. See
Figure 4-1 .
When you select this button, it opens the "Config Overview" window. Accessing it with-
out the touchscreen input is possible via the "SETUP" key. See
Chapter 5.5, "Configur-
ing Measurements" , on page 78.
The "Config Overview" illustrates here shows the flow of a distance-to-fault (DTF) mea-
surement at different stages and the relevant parameters which have an impact on the
measurement at each stage.
Screen Layout and Elements