Instrument Functions
R&S
®
Cable Rider ZPH
78
User Manual 1321.0950.02 ─ 03
4. Select the dataset with the settings you want and press "Load" softkey.
5. In the "User Preferences" dialog box, select the "Preset Mode" item.
A drop-down menu opens to select the preset mode.
6. Select the "User Defined" to load the dataset defined in the "Preset Dataset".
The R&S Cable Rider ZPH now loads the settings of the dataset after you press
PRESET.
7. Select "Discard Calibration Data" to define usage of calibration data after preset.
A drop-down menu opens to select the usage of calibration data.
8. Select "On" to apply calibration data or "Off" to discard calibration data after preset.
Depending on the selection , the R&S Cable Rider ZPH loads or discards the cali-
bration data after preset.
5.5 Configuring Measurements
The "Config Overview" dialog box provides an overview of the current configuration of
the R&S Cable Rider ZPH. In addition, you can also change the configuration in this
dialog box.
1. Press the SETUP key.
Configuring Measurements
