Remote Commands
R&S
®
Cable Rider ZPH
234
User Manual 1321.0950.02 ─ 03
SYSTem:FORMat:IDENt
<Format>
This command sets the response format to the *IDN? query. This function is intended
for re-use of existing control programs together with the R&S Cable Rider ZPH.
Parameters:
<Format>
LEGacy | NEW
LEGacy
Format that is compatible to the older R&S Cable Rider ZPH
version.
NEW
Format that is compatible to the newer R&S Cable Rider ZPH
version.
Example:
SYST:FORM:IDEN LEG
*IDN?
IDN would return the older R&S Cable Rider ZPH version.
SYST:FORM:IDEN NEW
*IDN?
IDN would return the newer R&S Cable Rider ZPH version.
SYSTem:HELP:HEADers?
This command returns a list of all available remote control commands.
This command is a query and therefore no *RST value.
Example:
SYST:HELP:HEAD?
Returns the syntax of all available commands.
Usage:
Query only
SYSTem:HELP:SYNTax?
<arg0>
This command returns the full syntax of the specified command.
This command is a query and therefore no *RST value.
Parameters:
<arg0>
String containing the command you want to query.
Example:
SYST:HELP:SYNT? 'SYST:ERR?'
Returns the full syntax. In this case: 'SYSTem:ERRor[:NEXT]'.
Usage:
Query only
SYSTem:LANGuage
<Language>
This command sets the language of the user interface. You can query a list of available
languages with
Parameters:
<Language>
String containing the language.
Remote Control - Commands
